---
title: Editing the Noritsu NetOrder Interface Settings
description: >-
  Learn how to edit Noritsu NetOrder interface settings, including IP address,
  timeout, print options, and back print parameters for accurate order printing.
---

> **For AI agents:** the complete documentation index is at [llms.txt](/llms.txt). Append `.md` to any page URL for its markdown version.

**Sending orders straight from the kiosk (Print Server):**

1. Press the bottom left corner of the intro screen.
2. Enter the pass code (default is 1234).
3. Select the **Setup Wizard**.

|                                           |
|:------------------------------------------|
| ![Net Order SW](/images/printer-guides/editing-the-noritsu-netorder-interface-settings/netorder-sw.jpg)            |
| Setup Wizard Printer Configuration Screen |

**Using Lab 50 installed on a separate computer:**

1. Click on the Settings tab in Lab 50.
2. Select the Fulfillment option on the left side of the screen to expand it.
3. Select Print Server.
4. Press the **Setup Wizard** button, and the Setup Wizard will launch.

**Once you have the Setup Wizard open:**

1. Click on **Printer Configuration**.
2. Click on **Add Printer**.
3. In the menu at the right, select **Noritsu NetOrder**.
4. In the **Printer Name** field, enter **“NetOrder”**, or any name you wish to use.
5. Click the **Add** button.
6. Click on the newly created **Noritsu NetOrder** Interface option in the top, left corner to display the options for this interface.

**Noritsu Net Order General Settings:**

- **QSS IP Address:** Enter the IP address of the printer. If the QSS software is installed locally, use **127.0.0.1**.

- **Timeout Seconds:** Leave as default (which is 60 seconds) unless instructed to change for troubleshooting purposes.

- **Debug:** If after changing all of the settings, the Noritsu NetOrder interface does not work, come back into this screen and set this to **True**. (Default is **False**.)

- **Wait For Print:** If set to **True**, the APM software will wait for a printed status from the Noritsu software to determine if the current order was successfully printed before sending a new order. (Default is **False**.)

- **Matte Surface** and **Glossy Surface** Check that these numbers match up with how they are setup in the QSS software on the printer. (Default is 2 for matte and 1 for Glossy). If they are different than the default, then enter the correct values for both **Matte Surface** and **Glossy Surface**.

- **Index Print:** If an index print is needed for every order, then select **True**. If not, then leave it as **False**. (If an order calls for index print while this setting is false, it will still print an index print)

- **Back Print 1** and **Back Print 2:** Used to specify the desired back print format using the case-sensitive parameters listed below. Default is **%ORDER%*%ITEM%*(%PRODUCT% %FINISH%)%QTY%**.

The following is a list of available case-sensitive parameters that may be used:

- **%ORDER%** - Order Number
- **%PRODUCT%** - Product Name
- **%PROD\_ID%** - Product Id
- **%FINISH%** - Finish option (glossy/matte)
- **%QTY%** - Quantity
- **%ORIG\_FN%** - Original File Name
- **%ITEM%** - Item Index
- **%YEAR%** - Current 4 digit year
- **%MONTH%** - Current 2 digit month
- **%DAY%** - Current 2 digit day
- **%FNAME%** - Customer first name
- **%LNAME%** - Customer last name
- **%PHONE%** - Customer phone number

|                                |
|:-------------------------------|
| ![Net Order Settings](/images/printer-guides/editing-the-noritsu-netorder-interface-settings/netordersettings.jpg) |
| Noritsu NetOrder Interface     |