---
title: Editing the Fuji C8 Interface Settings
description: >-
  Learn how to edit the Fuji C8 interface settings, including hot folder, device
  name, and resizing options in the Setup Wizard.
---

> **For AI agents:** the complete documentation index is at [llms.txt](/llms.txt). Append `.md` to any page URL for its markdown version.

**Sending orders straight from the kiosk (Print Server):**

1. Press the bottom, left corner of the intro screen.
2. Enter the pass code (default is 1234).
3. Select the **Setup Wizard**.

**Using Lab 50 installed on a separate computer:**

1. Click on the Settings tab in Lab 50.
2. Select the Fulfillment option on the left side of the screen to expand it.
3. Select Print Server.
4. Press the **Setup Wizard** button, and the Setup Wizard will launch.

**Once you have the Setup Wizard open:**

1. Click on **Printer Configuration**.
2. Click on **Add Printer**.
3. In the menu at the right, select **Fuji C8 / PrintPix NC1000**.
4. In the **Printer Name** field, enter **“Fuji C8”**, or any name you wish to use.
5. Click the **Add** button.
6. Click on the newly created **Fuji C8 / PrintPix NC 1000** option in the top, left corner to display the options for this interface.

|                                           |
|:------------------------------------------|
| ![C8 SW](/images/printer-guides/editing-the-fuji-c8-interface-settings/c8-sw.jpg)            |
| Setup Wizard Printer Configuration Screen |

**C8 Settings Options:**

- **Hot Folder:** Change the path to the C8Spool folder on the machine with the C8 software installed. The default value is \\FRONTEND\C8spool\.

- **Printing Mode:** In this field, select **Fuji C8** if it is not chosen already.

- **Device Name:** Enter the unique name of the C8 machine in the field (Default is **SP1SRGB**).

- **ID:** Enter the same name as entered in the Hot Folder section (Default is APM).

- **Resizing Method:** Select how you would like the printer to crop the images. The choices are **FILLIN**, **FITIN**, or **NONE**. The default is **FILLIN**.

- Leave the **Wait for print**, **Indicate success on timeout** and **Timeout Seconds** as is unless otherwise instructed for troubleshooting purposes.

**PrintPix NC-1000 Settings Options:**

- **Hot Folder:** This should be setup to match the settings in the FujiFilm Printpix NC-1000 application. The default path is C:\APM\_Folders\Fuji\_NC1000\_Hotfolder\.

- **Printing Mode:** In the field, select **Fuji NC-1000** if it is not chosen already.

- **Device Name:** Enter **NC-1000** in the Device Name field (Default is **SP1SRGB**).

- **ID:** Enter the same name as entered in the Hot Folder section (Default is APM).

- **Resizing Method:** Select how you would like the printer to crop the images. The choices are **FILLIN**, **FITIN**, or **NONE**. The default is **FILLIN**.

- **Leave the \*Wait for print**, **Indicate success on timeout** and **Timeout Seconds** as is unless otherwise instructed for troubleshooting purposes.

|                                           |
|:------------------------------------------|
| ![C8 Settings](/images/printer-guides/editing-the-fuji-c8-interface-settings/c8-settings.jpg)            |
| Fuji C8/PrintPix NC-1000 General Settings |